Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1

See what our Experts say about this Thomas Payne Accessories and Parts

• Troubleshooting Functions Not Working on Thomas Payne Momentum RV Dual Reclining Sofa
  There are a few possibilities as to why only one side of your Thomas Payne Momentum RV Dual Reclining Sofa is acting up (or not acting up at all in your case). There are 3 components that allow the recliner to operate the lights, massage, and heater. These are the Cup Holder # 195-387597, Control Box # 195-387596, and the 12V Power Cord # 195-387595. To determine which of these components needs to be replaced simply try using parts from the side that is working. Start off by swapping...
  view full answer...
• Troubleshooting Thomas Payne Recliner Power Issues Where Nothing Works
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that isn't the issue. Next, I recommend checking the Cup Holder # 195-387597 and it's wiring connection because that selects the functions as a built in wired remote to the control box. Next check the connections to the control box # 195-387596 itself. Finally check the 12V power cord # 195-387595. There are no external fuses or circuit breakers that would...
  view full answer...
• Why Would The Lights, Massage and Heat Not Work When Recliner is Fully Reclined?
  It sounds like the wiring may be shorting out when the recliner is fully reclined. I recommend checking the wiring for any shorts or signs of the wiring connectors coming apart as it reclines.
  view full answer...
• What is Warranty Length of Thomas Payne Recliners with Heat Function
  The warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original purchase. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is...
  view full answer...
• Troubleshooting Thomas Payne Momentum Recliner Not Closing
  It sounds like the issue may be in the control box. There is a way to troubleshoot the control box and that is by switching the control boxes from each recliner to the other. If the recliner that does not close now, closes with the opposite control box and vice versa, you will need to replace that control box. You will need the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387596 to correct the problem.
  view full answer...
• Troubleshooting Heater Function of Thomas Payne Power Recliner that Stopped Working on One Side
  We've checked with Thomas Payne about this issue in the past and they said that either the heater is bad or the control box needs to be replaced on your Thomas Payne Momentum recliner. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is bad and you can replace it with part # 195-387596. If you don't have continuity...
  view full answer...
• Solution for Thomas Payne Couch that Heater Switch Does Not Work
  The control box of your couch is not interpreting the switch turning off and on. This is evident as the other functions of your couch are working properly with the cup switch. So you'd need the replacement control box part # 195-387596 and you'd be set.
  view full answer...
• Testing Heater for Thomas Payne Momentum Sofa
  When testing the control box you will not unplug it; you will use Multimeter # PTW1714 and unplug the red and black wires from the control box to test them for continuity. If you do have continuity the control box is simply bad and you can replace it with the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596.
  view full answer...
• How to Remove Cup Holder from Thomas Payne Momentum RV Dual Reclining Sofa
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related to the control box. This is found under the chair...
  view full answer...
• Replacement Parts For Thomas Payne Power Recliner That Will Not Recline
  When looking into why your Thomas Payne Power Recliner won't recline it sounds like the control boxes have gone bad. The Replacement Control Box For Thomas Payne Momentum Recliners and Sofas # 195-387596 will get your recliner to recline again. This is for the Momentum Recliner. If you have The Thomas Payne Seismic Recliner you will need The Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR. I attached a review video link below.
  view full answer...
• Thomas Payne Dual Theater Seating Massage Feature Troubleshooting
  I've spoken with Thomas Payne about your dual theater seating # 195-000091. You need to check all the connections and if the problem is still happening, then you will need to replace the control box. Usually that will fix it.
  view full answer...
• Availability of Replacement Parts to Power the Thomas Payne Momentum RV Dual Reclining Sofa
  We do have some replacement parts for power in regards to the Thomas Payne Momentum RV Dual Reclining Sofa that you referenced. The parts that we have are # 195-387597 for the cup holder, # 195-387596 for the control box, and # 195-387595 for the power cord. The cup holder is self-explanatory but if you are needing to replace one of the other 2 parts and are not sure which one it is, the control box can be located either behind or under your recliner. This is known as the "brains" of...
  view full answer...
• Troubleshooting Thomas Payne Theater Seat Recliner Seat Heater Not Connected
  It sounds like you have the heating pad in your chairs and are missing the wiring harness that connects the seat heater to everything else. The Replacement Seat Heater Kit for Thomas Payne RV Furniture # 195-000113 connects to the two prong connection from the seat heater you described. It will also connect the heating pad to the remote control and the power supply to get the seat heater up and running.
  view full answer...
• How are RV Recliners With Heat and Massage Functions Powered
  The recliners run off of 110V AC, using a standard 110V outlet. So, if your camper doesn't already have a power inverter you could use one like the Go Power # 34280176. If your loveseat is a Thomas Payne model, you can use the # 195-387595 replacement power cord if yours is missing.
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Has Lights That Don't Turn Off
  Since you mentioned you've already replaced your cupholder # 195-387597, and your power cord # 195-387595, I suggest you try to reset the chair if not preformed already. You'll want to unplug the unit from power, and let it set for about 10 minutes. Then plug the unit back into power, and check for functionality. If that doesn't fix it, then since you've already replaced your power unit and the cupholder, you'll more than likely need to replace the control box # 195-387596.
  view full answer...
• Do the Thomas Payne Momentum Recliners Have USB Ports
  No, the recliners that use the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 do not have USB ports.
  view full answer...
• Footrest Will Not Work on the Thomas Payne Momentum Sofa But Massage, Lights, and Heat Do
  It sounds like you have a Thomas Payne Momentum RV Dual Reclining Sofa like part 195-055-056-058. If this is the case then odds are there is an issue with the control box as 90% of problems with the Thomas Payne Momentum RV Dual Reclining Sofa are associated with a faulty control box. If you swap the control box on the side that is working and the footrest then functions you know the control box is bad and will need to be replaced with the Replacement Control Box for Thomas Payne Momentum...
  view full answer...
• Troubleshooting Lights on Thomas Payne Momentum RV Dual Reclining Sofa
  If the lights are not working on your Thomas Payne Momentum RV Dual Reclining Sofa 195-055-056-058 first just try unplugging it from your outlet. If that does not work you should unplug the 12V cords from the back of the sofa and then reconnect them. I have added a link to a video which shows how you can do this; it will be at about the 4:00 mark in the video. Should you need replacement parts to fix the issue we carry the Replacement 12V Cord for Thomas Payne Momentum Recliners and Sofas...
  view full answer...
• Troubleshooting Thomas Payne RV Recliner That Does Not Retract
  It sounds like the control box is faulty on your Thomas Payne recliner, however, you could also try unplugging the chair for 10+ minutes to let the chair reset and also check for any wires that could have been pinched and damaged. If it is still not able to recline then you very likely need a new control box. To find the correct control box you will need to verify if you have a Momentum series or Seismic Series. The manufacturer was not able to tell me exactly where to look for a part...
  view full answer...
• Thomas Payne Momentum Theatre Seating Stuck in Recline
  I wish there was a manual latch or release for the foot rest of the momentum seating. It's not an ideal solution but you could try swapping the good motor from the other side of the chair to the bad side to lower it for the time being. Most of the time it's the control box so if the motor swap does not work you can try that too. For a replacement control box you'd want the # 195-387596.
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Will Not Recline
  For your Thomas Payne dual reclining loveseat, there could be a number of reasons why your recliner will not recline any longer. Lippert, the manufacturer of these recliners, has recommended you first unplug the unit from power, and let it sit for around 10 minutes. Sometimes a simple turn off, turn on fix is all that is needed to fix an issue. Another thing you can do is swap the cup holders, and see if the functions change on the chairs. If the left side works with the other cup holder,...
  view full answer...
• Troubleshooting Thomas Payne RV Couch Cupholder Power
  Looking into this it sounds like you have a loose connection to the cupholder wiring connectors on your Thomas Payne couch or the cupholder wiring is just bad and needs to be replaced. The Replacement Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387597 will connect directly to the couch wiring. If that doesn't work it could be a bad control box. If you have The Momentum version The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1...
  view full answer...
• Replacement Control Box Options for the Thomas Payne Seismic & Momentum Series Recliners and Sofas
  We do carry a couple of replacement control boxes like the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR which will work with the Seismic series recliner and sofas, and the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 which will work with Momentum series recliners and sofas. If you have one or the other series of recliners mentioned above, this replacement will work great for you. If you do not, then unfortunately...
  view full answer...
  
• Troubleshooting Thomas Payne Momentum Sofa That Wont Recline But Other Functions Work
  It sounds like you have a Thomas Payne Momentum RV Dual Reclining Sofa that one of the control boxes has gone bad on; in our experience, 90% of problems with the Thomas Payne Momentum RV Dual Reclining Sofa are associated with a faulty control box and there is an easy way to test this. If you swap the control box on the side that is working with the one on the side where the footrest and reclining function doesn't work and it then functions- you know the control box is bad. You can replace...
  view full answer...

Do you have a question about this Accessories and Part?